– Three models for straightening and cutting wire and profiled wire with a diameter of 1.6 – 16.0 mm from coils and one model for straightening and cutting electrode blanks with a diameter of 1.6 – 6.3 mm.
– High productivity due to high feed rate (16 – 120 m / min.).
– Convenient service.
Straightening and cutting machine И6120 is designed for straightening from coils of round metal and cutting it into bars of measured length.
The machine consists of a rotating frame, roller feed and lever cut. From the uncoiler, the end of the wire is guided into the feed rollers of the front feed mechanism. Using the lever-eccentric clamping mechanism, feed rollers are clamped, thereby supplying wire. After straightening the material in the correct frame, the wire is fed through the wiring to the feed rollers of the rear feed mechanism. Straightened section of the wire through the cutting sleeve, fixedly mounted in the housing of the feed mechanism, is fed into the closed chute of the receiving tray until it stops, adjusted to the required length of the cut rod, after which it is cut off.