Guillotine sheet shears of the МНГ4х1300 model are used for cutting sheet material with tensile strength δв ≤500 MPa. Cross cutting of a sheet, the thickness and width of which corresponds to the technical characteristics of the shears, is carried out in one stroke of the knife, longitudinal cutting is carried out by a series of repeated cuts while moving the sheet along the cut line. The length of the sheet is limited by the length of the stop, and the width of the cut strip is determined by the size of the swing of the bed.
– A set of knives;
– Side guides with a T-slot for aligning the sheet;
– Stop lock;
– Back stop of 750 mm with the NC controller;
– Switch of single and constant strokes;
– Foot pedal with emergency stop button;
– Safety module;
– Operations Manual.