СГА-1ЭБ machine consists of a welded frame, a worm gear mounted on the frame with a bending disk fixed to it. The central and bending pins are installed on the bending disk. A stop pin with a roller is installed in the hole of the bar welded to the top sheet of the frame.
Rotation to the input shaft of the worm gear is transmitted through gears and V-belt transmission from the electric motor. Changing the speed of the bending disk is carried out by shifting the gears. To comply with environmental requirements, it is possible to remove scale from the sheet of the frame through a funnel connected to the workshop exhaust ventilation.
The machine has two operating modes – manual and automatic. Manual mode is convenient for single or small quantities of bends and is used when setting up the machine and when checking sensors. In manual mode, you can work in the event of a sensor failure which eliminates machine downtime. Automatic mode is used when repeatedly implementing one or more consecutive bends.