Electromechanical breaks ВЭМ-1250, ВЭМ-1500, ВЭМ-2000 are designed for bending cylindrical products made of sheet metal with a maximum tensile strength of 50 kg / mm2. The machines are widely used in the manufacture of gutters and pipes of drainage systems, ducts and other similar sheet metal products.
The machines are produced on the basis of a stripped frame, which greatly simplifies transportation to the place of work. The machine has a fully removable adjustable upper shaft, which allows the manufacture of products with a closed loop. The machine can easily be adjusted to any radius. The drive is carried out through a gear motor on the two lower shafts. Equipping the break with a frequency controller allows to change the speed of rotation of the shafts, depending on the required tasks.